Twelve pulse converter: It is clear from the preceding discussion that increasing the pulse number to six greatly improves the performance of the converter. The ac line current has only…
Six pulse bridge converter: The conduction time of a thyristor in a six pulse connection can be increased when the converter is obtained by a series or parallel connection of…
Six pulse midpoint converter: The converter transformer converts the existing three phase system to a six phase one, since it has six secondary windings. The Six pulse midpoint converter connections…
Three pulse midpoint converter: These are basically three-phase converters, and are very popular because a 3-phase supply is readily available. 3-phase converters have a greater power capability than single phase…
Two pulse bridge converter: A two pulse bridge converter is achieved as shown in Fig. 3.22 from two midpoint converters. They are connected in series on the dc side and…
Two pulse mid point converter: Two pulse mid point converter are, in general, single phase converters. The pulse number of the converter indicates the frequency of the ripple voltage superimposing…
Steam Turbine Efficiency: The overall Steam Turbine Efficiency is quite low (about 29%) due mainly to two reasons. Firstly, a huge amount of heat is lost in the condenser and…
Dynamic Conditions of a SystemDrive: Dynamic or transient conditions occur in SystemDrive systems when the operating point changes from one steady state condition to another, following a change introduced in…
