Choice of Electronic Signal Transmission: The range of air pressure used for Signal Transmission in pneumatic system is limited by the dynamic operating range of the pneumatic devices used. But…
Analog Electronics Process Controllers: An Analog Electronics Process Controllers must be capable of providing one or more of the three main methods of control, namely, Proportional, Integral and Derivative. The…
Step Function Response: The step function response consists of applying an instantaneous change in the control means and then recording graphically the result of the change on the measured variable.…
Bolometer: Bolometric measurements are based on the dissipation of RF power in a small temperature sensitive resistive element, called a Bolometer. This bolometer may be a short ultra thin wire…
Pulse Width Modulation(PWM): Pulse width modulation of PTM is also often called Pulse Duration Modulation (PDM). In this system, shown in Fig. 18.8, we have a fixed amplitude and starting…
Time Division Multiplexing(TDM): Time Division Multiplexing - Any pulse modulation scheme involves translating the audio, or modulating signal into a series of encoded pulses, sending these pulses over a transmission…
Data Logger Operation: Data Logger Operation - For proper understanding of a Data Logger Operation, it is essential to understand the difference between analog and digital signals. For example, measurement…
Weighted Converter Using Transistor Switches (Current Switch): Figure 17.19 (a) shows a circuit diagram of a weighted converter, using transistor switches. When the D bit is high (logic 1), it…
