Fiber Optic Communication

Power Budget in Optical Fiber

Power Budget in Optical Fiber: The term Power Budget in Optical Fiber is the relationship between the power losses in fiber links and associated equipment and the available input power to the system. The available Power Budget in Optical Fiber for a set of equipment is usually given by the. manufacturer. In some cases, the […]

Power Budget in Optical Fiber Read More »

Fiber Optic Testing

Fiber Optic Testing: The Fiber Optic Testing focuses primarily on the processes and equipment used during and after the installation of fiber optic cables and their associated equipment. The Fiber Optic Testing is performed by the engineer or technician to guarantee acceptable performance standards. Splices must be tested for optical clarity. They must not exceed

Fiber Optic Testing Read More »

Installation of Fiber Optic Cable

Installation of Fiber Optic Cable: Because of their light weight and flexibility, fiber cables are in most cases easier to install than their copper counterparts. There are some concerns, however, that must be faced by the individuals involved in designing the Installation of Fiber Optic Cable, for example, minimum bend radius and maximum tensile strength.

Installation of Fiber Optic Cable Read More »

Fiber Optic Components and Systems

Fiber Optic Components and Systems: The Fiber Optic Components and Systems can be divided into subgroups, the source, the link, and the detectors. We will now explore the makeup and role of each of these groups. The Source: The source usually consists of a light-emitting element which is triggered or actuated by an electronic or

Fiber Optic Components and Systems Read More »

Fiber Losses

Fiber Losses: Energy losses and signal degradation in Fiber Losses can be attributed to a variety of causes, some of which have been mentioned previously. To add to this list: 1. Light scattering (Rayleigh Scattering) is caused by imperfections in the fiber. It affects each wavelength differently and can be stated as 1/4λ. This scattering

Fiber Losses Read More »

Optical Fiber Classification

Optical Fiber Classification: The Optical Fiber Classification of light transmission through a glass fiber depend on many factors, for example: The composition of the fiber The amount and type of light introduced into the fiber The diameter and length of the fiber The composition of the fiber determines the refractive index. By a process called

Optical Fiber Classification Read More »

Construction of Optical Fiber Cable

Construction of Optical Fiber Cable: The manufacture and Construction of Optical Fiber Cable are somewhat complicated: In simple terms, a highly refined quartz tube that will eventually be filled with a combination of gases (silicon, tetrachloride, germanium tetrachloride, phosphorus oxychloride) is selected to start the process. This tube, about 4 ft long and about 1

Construction of Optical Fiber Cable Read More »

Light Wave Spectrum

Light Wave Spectrum: Light Wave Spectrum – In everyday terms, light can be defined as the pail of the visible spectrum that has a wavelength range between 0.4 μm (micrometer) and 0.7 μm (refer to Figure 18-2 to locate the color spectrum). This definition must be broadened somewhat for use in the optical (guided-light) communications

Light Wave Spectrum Read More »

Fiber Optics History

Fiber Optics History: Fiber Optics History – In 1870 John Tyndall, a natural philosopher living in England, demonstrated one of the first guided light systems to the Royal Society. His experiment involved using water as a medium to prove that light rays bend. He filled a container with water and allowed the water to escape

Fiber Optics History Read More »

Scroll to Top