Electrical Power Engineering Interview Questions and Answers: AC Distribution Interview Questions and Answers Braking and Mechanical Considerations Interview Questions and Answers Bus Bar Protection Interview Questions and Answers Circuit Breakers…
Unbalanced Source Voltages Operations: As Supply voltage may sometimes become unbalanced, it is useful to know the effect of Unbalanced Source Voltages Operations on motor performance. Further, motor terminal voltage…
Unbalanced Phase Current: The Unbalanced Phase Current in a 3-phase system can be expressed in terms of symmetrical components as under : Fig. 18.6 shows the vector representation of symmetrical…
Open Conductor Faults: An open conductor faults is in series with the line. Line currents and series voltages between broken ends of the conductors are required to be determined. Figure…
Double Line to Ground Fault (LLG): Figure 11.9 shows a Double Line to Ground Fault at F in a power system. The fault may in general have an impedance Zf…
Line to Line Fault (LL): Figure 11.7 shows a Line to Line Fault at F in a power system on phases b and c through a fault impedance Zf. The phases…
Single Line to Ground Fault: Figure 11.4 shows a Single Line to Ground Fault at F in a power system through a fault impedance Zf. The phases are so labelled…
Sequence Impedances and Networks of Synchronous Machine: Sequence Impedances and Networks of Synchronous Machine - Figure 10.11 depicts an unloaded synchronous machine (generator or motor) grounded through a reactor (impedance…