Vacuum Triode, Construction and Working: Construction of Vacuum Triode - The construction and the schematic symbol used for a vacuum triode are illustrated in Fig. 5.8. It, as the name…
What is Inductor in Electronics? An inductor has been defined as a physical device which is capable of storing energy by virtue of a current flowing through it. An Inductor…
Bus Interface in Microprocessor: Bus Interface in Microprocessor - A microcomputer consists of a set of components such as CPU, memory, I/O device and these components communicate with each other…
CW Doppler Radar Block Diagram: A simple CW Doppler Radar Block Diagram, such as the one shown in Figure 16-14, sends out continuous sine waves rather than pulses. It uses…
Planar Triode Construction: Planar Triode Construction - A short transit time is essential if grid loss and noise are to be minimized, as is the reduction of internal capacitances and…
Working Principle of Automatic Gain Control: Working Principle of Automatic Gain Control is a system by means of which the overall gain of a radio receiver is varied automatically with…
Extensions of Single Sideband Amplitude Modulation: The Extensions of Single Sideband Amplitude Modulation is namely, Forms of Amplitude Modulation: This section on amplitude modulation defines, describes and lists the main applications…
Define Suppression of Carrier: Three main systems are employed for the generation of SSB; the filter method, the phase cancellation method and the "third method." They differ from one another…