General Methods of Testing Protective Gear: The General Methods of Testing Protective Gear are namely, Primary Injection, Secondary Injection, Measurement of Time, Primary Injection: These tests are limited by the…
Heavy Current Test Plant: Heavy Current Test Plant - Simulating the exact fault conditions as would occur in practice is a difficult and a tedious job. The plant for providing…
Three Phase Auto Recloser vs Single Phase Auto Reclose: Three Phase Auto Recloser is one in which the three phases of the transÂmission line are opened after fault incidence, independent…
Types of Auto Reclosing: Types of Auto Reclosing can be broadly classified in two categories: Medium voltage auto-reclose where continuity of supply is the principal aim. High voltage auto-reclose where…
Auto Reclosing Scheme: Auto Reclosing Scheme - It is well realized that the transient faults which are most frequent in occurrence do no permanent damage to the system as they…
Bus Zone Protection: Bus Zone Protection includes, besides the bus itself the apparatus such as circuit breakers, disconnecting switches, instrument transformers and bus sectionalizing reactors, etc. Although bus zone faults…
Motor Protection: Motor Protection - There is a wide range of motors in existence for various purposes. However, the fundamental problems affecting the choice of protection are independent of the…
Direct Connected Generator Protection: Direct connected generators are normally of smaller ratings and a typical scheme of Direct Connected Generator Protection for a 30 MW generator is shown in Fig.…