Load Flow Analysis in Power System: Load Flow Analysis in Power System describes, the complex power injected by the source into the ith bus of a power system is where…
Combinational Circuit | Block Diagram | Design Procedure: When logic gates are connected together to produce a specified output for certain specified combinations of input variables, with no storage involved,…
First Order High Pass Butterworth Filter: As mentioned earlier, a high pass filter is a circuit that attenuates all the signals below a specified cut off frequency denoted as fL.…
Second Order Low Pass Butterworth Filter: The practical response of Second Order Low Pass Butterworth Filter must be very close to an ideal one. In case of low pass filter,…
First Order Low Pass Butterworth Filter: The first order low pass butterworth filter is realized by R-C circuit used along with an op-amp, used in the noninverting configuration. The circuit…
Important Questions of Integrated Circuits: Give classification of integrated circuits. Compare IC families on the basis of substrate used, structure, active devices, passive devices and applications. What are the different…
Diffusion Process in IC Fabrication: Diffusion is the oldest technique used to add impurity into the Substrate. The main aim of the Diffusion Process in IC Fabrication is to change  the…
Lithography Process in IC Fabrication: Lithography Process is used to produce a multiple image on the resists which covers the wafer. A Lithography Process in IC Fabrication can be realised…