Current Limit Control of Drives: Current Limit Control of Drives scheme of Fig. 3.3 is employed to limit the converter and motor current below a safe limit during transient operations.…
Automatic Frequency Control Block Diagram: Automatic frequency control: As previously we see, the heart of an AFC circuit is a frequency-sensitive device, such as the phase discriminator, which produces a…
Delayed Automatic Gain Control: Delayed Automatic Gain Control: Simple AGC is clearly an improvement on no AGC at all, in that the gain of the receiver is reduced for strong…
Working Principle of Automatic Gain Control: Working Principle of Automatic Gain Control is a system by means of which the overall gain of a radio receiver is varied automatically with…
Frequency Changing and Tracking in Receivers: The mixer is a nonlinear device having two sets of input terminals and one set of output terminals. The signal from the antenna or…
Generation of Frequency Modulation: The Generation of Frequency Modulation system is a variable output frequency, with the variation proportional to the instantaneous amplitude of the modulating voltage. The subsidiary requirements…
Noise and Frequency Modulation: Noise and Frequency Modulation is much more immune to noise than amplitude modulation and is significantly more immune than phase modulation. In order to establish the…
Timers and Counters in 8051 Microcontroller: The Timers and Counters in 8051 Microcontroller has two 16-bit Timer/Counter registers : Timer 0 and Timer 1. The 8052 has these two plus…