Feeder Protection Relay Articles: Application of 3 Phase System : In a Application of 3 Phase System, a wide variety of faults can occur, i.e. phase to phase, phase to…
Static Distance Protection Relay: Static Distance Protection Relay are characterized by having two input quantities respectively proportional to the voltage and current at a particular point in the power system,…
Phase Comparator Circuit: Phase Comparator Circuit technique is the most widely used for all practical directional, distance, differential and carrier relays. If the two input signals are S1 and S2…
Stator Protection: Stator Protection - The type of stator faults likely to occur have been discussed already. The earth-fault current is usually limited by resistance in the neutral of the…
Selection of Distance Relay: The factors to be considered for the Selection of Distance Relay scheme can be enumerated as follows: Speed of operation. Measuring relay characteristics. Fault coverage. Economic…
Distance Protection Impedance Relay: Distance Protection Impedance Relay - It has already been pointed out that the impedance is directly proportional to the length of the line, and hence an…
Time Grading of Distance Relay: Two methods of Time Grading of Distance Relay are shown in Fig. (5.18). First Method is the distance time method at (a) has the operating…
Types of Feeder Protection Relay: A composite transmission system may use one or more of the following types of Feeder Protection Relay. Overcurrent Protection: This is of two types: (i)…