Generator Transformer Protection

Generator Transformer Protection: Generator Transformer Protection - Protective relays, being component parts of electrical switchgear, should be closely associated with the control section of such systems, e.g. indicating and signalling systems. Thus the signalling and indicating systems…

Continue Reading Generator Transformer Protection

Generator Inter Turn Fault Protection

Generator Inter Turn Fault Protection: Merz-Price circulating current protection system does not provide protection against turn-to-turn faults (short circuits between the turns) on the same phase winding of the stator…

Continue Reading Generator Inter Turn Fault Protection

Direct Connected Generator Protection

Direct Connected Generator Protection: Direct connected generators are normally of smaller ratings and a typical scheme of Direct Connected Generator Protection for a 30 MW generator is shown in Fig.…

Continue Reading Direct Connected Generator Protection

Protection of Alternators and Transformers Articles

Protection of Alternators and Transformers Articles: Balanced Earth Fault Protection : In small-size alternators, the neutral ends of the three-phase windings are often connected internally to a single terminal. Therefore,…

Continue Reading Protection of Alternators and Transformers Articles

High Voltage Test on Transformer

High Voltage Test on Transformer: High Voltage Test on Transformer are very important and costly apparatus in power systems. Great care has to be exercised to see that the transformers…

Continue Reading High Voltage Test on Transformer

Cascade Transformer Connection

Cascade Transformer Connection: Figure 6.10 shows the Cascade Transformer Connection units in which the first transformer is at the ground potential along with its tank. The second transformer is kept…

Continue Reading Cascade Transformer Connection