Open Conductor Faults: An open conductor faults is in series with the line. Line currents and series voltages between broken ends of the conductors are required to be determined. Figure…
Generator Faults: Generator faults can be considered under the following heads. (a) Stator Faults: These include the following: Phase-to-earth faults. Phase-to-phase faults. Inter-turn faults. Most faults occur in the stator…
Types of Cable Faults: Cables are generally laid directly in the ground or in ducts in the underground distribution system. For this reason, there are little chances of faults in…
Types of Unsymmetrical faults in Power System: There are two types of unsymmetrical faults in power system namely, Shunt Type Fault: Single Line to Ground Fault (LG) Line to Line Fault…
Unsymmetrical Fault Analysis Articles: Types of Unsymmetrical faults in Power System: There are two types of unsymmetrical faults in power system namely, Shunt Type Fault: Single Line to Ground Fault…
Modern Power System Articles: This Modern Power System Articles which includes the following topics: Introduction to Modern Power System Planning Diversity Factor in Power System Load Forecasting Techniques in Power…
Protection and Switchgear Interview Questions and Answers: Following are the below Protection and Switchgear Interview Questions and Answers, Protection and Switchgear Important Questions and Answers 1. Mention the essential features…
Directional Overcurrent Protection Principle: For the main bus-bars in the power stations, due to their importance in the operating conditions, it is required that the disconnection be without any delay…