Dynamic Electric in Electric Drives Articles: Dynamic Electric: An industrial drive system basically consists of a mechanical working equipment or load, which has to be kept in motion to turn…
Control Techniques for Electric Drives Articles: Introduction Control Techniques in Electric Drives: An electric drive is a well established industrial drive as it has several adÂvantages and special features. Its…
Margin Angle Control of Synchronous Motors: The commutation Margin Angle Control of Synchronous Motors is defined as the angle measured from the end of commutation to the crossing of the…
Magnitude Optimum: The design of a controller based on the principle Magnitude Optimum that it allows all the freÂquencies to pass through in a similar way for a simple system is…
Controller Design Frequency Response: The Controller Design Frequency Response (or root locus) alters or reshapes the frequency response (or root locus) of the original system to the desired one. Thus…
Methods of Compensation in Control System: The Different Methods of Compensation in Control System are Cascade Compensation Feedback Compensation Load Circuit Compensation Input Circuit Compensation A drive system having closed…
Control System Performance: From the foregoing discussion on control systems it can be seen that the beÂhaviour of the control systems can be specified, based on several time domain specifications.…
Nyquist Criterion: Nyquist Criterion - This stability criterion enables one to establish the stability of a system using a graphical procedure in the frequency domain. Here also there is no…
