Tag: protection system

Basic Principle of Operation of Protective System

Basic Principle of Operation of Protective System: Basic Principle of Operation of Protective System – Each relay in a protection scheme performs a certain function and responds in a given manner to a certain type of change in the circuit quantities. For example one type of relay may operate when the current increases above a […]

Protection Systems

Essential Qualities of Protection Systems: Every Protection Systems which isolates a faulty element is required to satisfy four basic requirements: (i) reliability; (ii) selectivity; (iii) fastness of operation; and (iv) discrimination. Without reliability and selectivity the protection would be rendered largely ineffective and could even become a liability. Reliability Reliability is a qualitative term. Quantitatively […]

Zone Protection

Zone Protection: The Zone Protection is that part of a power system guarded by a certain protection and usually contains one or at the most two elements of the power system. The zones are arranged to overlap so that no part of the system remains unprotected. Figure (1.1) shows a typical arrangement of overlapping zones […]

Basic Ideas of Protection Relay

Basic Ideas of Protection Relay: An electric power system should ensure the availability of electrical energy without interruption to every load connected to the system. When the electric power supply is extended to remote villages the power system would consist of several thousand kilometres of distribution lines. The high voltage transmission lines carrying bulk power […]