Source Transformation Technique: Source Transformation Technique – In solving networks to find solutions one may have to deal with energy sources. It has already been discussed before that basically, energy sources are either voltage sources or current sources. Sometimes it is necessary to convert a voltage source to a current source and vice-versa. Any practical […]

### METHODS OF CIRCUIT ANALYSIS

## Supernode Analysis

Supernode Analysis: Suppose any of the branches in the network has a voltage source, then it is slightly difficult to apply nodal analysis. One way to overcome this difficulty is to apply the Supernode Analysis. In this method, the two adjacent nodes that are connected by a voltage source are reduced to a single node […]

## Nodal Analysis Examples

Nodal Analysis Examples: Nodal Analysis Examples – we discussed simple circuits containing only two nodes, including the reference node. In general, in a N node circuit, one of the nodes is chosen as reference or datum node, then it is possible to write N — 1 Nodal Analysis Examples by assuming N — 1 node […]

## Supermesh Analysis

Supermesh Analysis: Suppose any of the branches in the network has a current source, then it is slightly difficult to apply mesh analysis straight forward because first we should assume an unknown voltage across the current source, writing mesh equations as before, and then relate the source current to the assigned mesh currents. This is […]

## Mesh Analysis Equation

Mesh Analysis Equation: Mesh Analysis Equation and nodal analysis are two basic important techniques used in finding solutions for a network. The suitability of either mesh or nodal analysis to a particular problem depends mainly on the number of voltage sources or current sources. If a network has a large number of voltage sources, it is […]

## Cut Set Matrix and Tree Branch Voltages

## Tie Set Matrix

## Incidence Matrix

Incidence Matrix (A): The incidence of elements to nodes in a connected graph is shown by the element node incidence matrix (A). Arrows indicated in the branches of a graph result in an oriented or a directed graph. These arrows are the indication for the current flow or voltage rise in the network. It can […]